The Allrounder for In- and Outdoor
Satellite Speaker IP64 Passive
The Satellite Speaker IP64 is a real all-rounder and the solution for everyone who needs a water-resistant speaker. As the name suggests, the speaker has protection class IP64 and is therefore perfect for outdoor use. Whether for the outdoor area in a restaurant, beer garden or privately on the terrace or balcony, the vertically and horizontally mountable speaker is easy to attach. The flexible mounting arm also allows you to set up the optimal angle to perfectly enjoy the sound of the 2-way speaker.
- Typ: 2-way (tweeter and woofer)
- Nominal Impedance: 8 ohms
- Transmission range: 50 Hz … 25 kHz
- Rated power: 50 W
- Maximum power handling: 80 W
- Can be mounted horizontally or vertically
- Flexible arm at the back of the housing – for the perfect mounting angle
- Product dimensions (HxWxD): 216x150x142.5 mm
- Protection class: IP64
- Perfect in combination with the Loxone Audioserver
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
The bigger built-in speaker
Back Box Housing Install 10
The Install Speaker 10 Passive can be built into ceilings, walls and furniture. It has a 10″ woofer built into an enclosure that other manufacturers require for an 8″ woofer. The woofer uses the Altima membrane, which consists of aluminum, titanium and magnesium. This material is also used in our Chromium and Aurum HiFi series. The Install Speaker 10 Passive also features a state-of-the-art titanium dome tweeter with a diameter of 32mm. These properties ensure perfect ambient sound in combination with the Loxone Audioserver and the perfect acoustic experience with the Atmos home cinema system.
- Dimensions: 475 x 475 mm
- installation depth including baffle: 136 mm
- Loudspeaker outlet: Ø 258 mm
- Internal volume: 18 L
- Cable entry: 2×20 mm
- Material: medium-density fibreboard (MDF), rear wall dampened with acoustic fleece
- Pre-drilled holes and millings for easy installation
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
For perforated acoustic ceilings
Back Box Housing Install 10
As with our Install Speaker 7, the Install Speaker 10 has the right installation housing for installation in perforated acoustic ceilings. Because loudspeakers need a closed baffle for good acoustics and this is not the case with open ceilings. In addition, acoustic fleece (polyester) insulation material is attached to the rear wall, so that sound reflections from the rear wall are reduced. By the way, the more volume, the fuller the sound and that is why the Install 10 back box has a volume of 18 liters compared to the 9 liters of the Install 7 back box.
- Dimensions: 475 x 475 mm
- installation depth including baffle: 136 mm
- Loudspeaker outlet: Ø 258 mm
- Internal volume: 18 L
- Cable entry: 2×20 mm
- Material: medium-density fibreboard (MDF), rear wall dampened with acoustic fleece
- Pre-drilled holes and millings for easy installation
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
